How to fix the fiberglass splash pad
Before fixed up the model, there are 5 materials you need to buy, from your local market.
| Glass fiber mats-chopped strand |  |
| Unsaturated Polyester Resin | |
| Hardener |
|
| Car Painting | White |
| Poly-Putty Base | |
| Abrasive paper | |
Formulating two coatings
First one is to mix the Unsaturated Polyester Resin and Hardener with1:0.8 ratio, mix thoroughly
Second one is to mix the Poly-Putty Base and Hardener with 1:0.1 ratio, mix thoroughly
So you will get two coatings, then following the below steps to fix it.
Step 1. Remove the paiting around the broken part.
Step 2. Cover the scraped/broken parts with the Glass fiber Mat fully
Step 3. Brush the first one coatings to fulfill the fiber mat smoothly-(Naturally dry)
Repeat the first and second steps 2-3 times, make it thick enough(4-8mm)
Step 4. After step 2, wait for one hour, brush them with the second coatings- (Naturally dry)
Step 5. Grinding the surface with abrasive paper, make it smoothly -(Naturally dry)
Step 6: Spray with car painting-(Naturally dry)
Each step need to make it dry naturally then going next step.